Antennas: Base Station
RT-AN-BV1 Base Antenna
152-156 MHz 3 dB Fiberglass Omni Base Station Antenna
Frequency Range (MHz): 152-156
Gain: 3 dBd
Bandwidth (MHz): Same as Freq Range (2:1 VSWR)
Electrical Downtilt: 0
Power (watts): 250
Vert. Beamwidth: 33 Deg
Termination: N-Female
Jumper Supplied: No
Mounting Hardware: Optional FM2
Support Pipe Dia. (in.): 1-1/4
Overall Length (in.): 107
Wind Rating (mph): 125
Net Weight (lbs.): 8
Ship Weight (lbs.): 10
Base station antennas are at the heart of your GPS tracking system. It is vital they work well, and a great antenna will improve your the radio coverage of your system.
An important rule for radio system design is: put the best antenna you can afford at your base station and at your repeater sites. A good base station antenna is:
-
Rugged
-
Reliable
-
Weather resistant
-
Provides improved gain
-
UV protected
RT-AN-BV2 Base Antenna
152-162 MHz 3 dB Fiberglass Omni Base Station Antenna
Frequency Range (MHz): 156-162
Gain :3 dBd
Bandwidth (MHz): Same as Freq Range (2:1 VSWR)
Electrical Downtilt: 0
Power (watts): 250
Vert. Beamwidth: 33 Deg
Termination: N-Female
Jumper Supplied: No
Mounting Hardware: Optional FM2
Support Pipe Dia. (in.): 1-1/4
Overall Length (in.): 107
Wind Rating (mph): 25
Net Weight (lbs.): 8
Ship Weight (lbs.): 10
RT-AN-BV3 Base Antenna
162-168 MHz 3 dB Fiberglass Omni Base Station Antenna
Frequency Range (MHz): 162-168
Gain: 3 dB
Bandwidth (MHz): Same as Freq Range (2:1 VSWR)
Electrical Downtilt: 0
Power (watts): 250
Vert. Beamwidth: 33 Deg
Termination: N-Female
Jumper Supplied: No
Mounting Hardware: Optional FM2
Support Pipe Dia. (in.): 1-1/4
Overall Length (in.): 107
Wind Rating (mph): 125
Net Weight (lbs.): 8
Ship Weight (lbs.): 10
RT-AN-BV4 Base Antenna
168-174 MHz 3 dB Fiberglass Omni Base Station Antenna
Frequency Range (MHz): 168-174
Gain: 3 dB
Bandwidth (MHz): Same as Freq Range (2:1 VSWR)
Electrical Downtilt: 0
Power (watts): 250
Vert. Beamwidth: 33 Deg
Termination: N-Female
Jumper Supplied: No
Mounting Hardware: Optional FM2
Support Pipe Dia. (in.): 1-1/4
Overall Length (in.): 107
Wind Rating (mph): 125
Net Weight (lbs.): 8
Ship Weight (lbs.): 10
Antennas - Misc.
Mobile
Antenna RT-AN-MU1, 450-470MHz, 3dB
5/8 wave base loaded antenna, 450-470MHz, 200 Watts, 3dB Gain.
Mount not included.
FrequencyRange : 450-470
Connector Type : None
Gain: 3 dB
Power (watts): 200
Whip Material: Stainless Steel
Whip Length: 16" @ lowest frequency
Base Style: NMO Style
MountStyle: None
Mobile Combo UHF/GPS
Antenna RT-AN-GPSK
2dBi UHF + 20dB GPS, 450-470MHz,
20MHz UHF BW BNC terminated on RG-58 6' cable.
1/4 wave combo GPS and Radio antenna,
Thru-hole mounted for mounting on the roof
of a vehicle.
FrequencyRange : 450-470 MHz
Gain : 2 dB
Power (watts): 50
Whip Material: Stainless Steel
Whip Length: 14cm
Base Style: 14mm thru hole
MountStyle: None
Connector Type: BNC & SMA
Antenna RT-AN-1560
2dBi UHF + 20dB GPS, 450-470MHz,
10MHz UHF BW BNC terminated on RG-58 cable. Specify frequency when ordering.
5/8 wave combo GPS and Radio antenna,
Thru-hole mounted for mounting on the roof
of a vehicle.
FrequencyRange: 450-470 MHz
Gain: 0 dB
Power (watts): 50
Whip Material: Stainless Steel
Whip Length: 22 inches
Base Style: 3/4" thru hole
MountStyle: None
Connector Type: BNC & SMA
Antenna RT-AN-1565
UHF + GPS, 445-470MHz,
10MHz UHF BW BNC terminated on RG-58 cable.
Specify frequency when ordering.
5/8 wave combo GPS and Radio antenna,
Thru-hole mounted for mounting on the roof
of a vehicle.
FrequencyRange: 445-470
Gain: 4 dB
Bandwidth: 10MHz
Power (watts): 50
Whip Material: Stainless Steel
Whip Length: 30 inches
Base Style: 3/4" thru hole
MountStyle: None
Connector Type: BNC & SMA
GPS
Antenna RT-AN-GP1
26 DBI GPS ANTENNA ,Active, 1575 MHZ, Black, Magnetic mount with SMA-MCONN
Connector Type: SMA Male
FrequencyRange: 1575.4 MHz
Gain: 28 dB ±2 dB
Polarization: Right Hand Circular
Noise Figure: 2.0 dB Max
Voltage: 3 Vdc
Current: 20 mA Max
Housing: Black
Dimensions: 2" (Dia) x .6"(H)
Cable Type: 6' RG174
Mounting: Magnet Mount
Th RT-AN-GP1 antenna can be used with the M7-GX GPS series transponders. It is a "magnet mount" antenna, used for temporary installations and quick demonstrations systems.
The RT-AN-GP1 GPS antenna has a built in 3V low-noise amplifier (LNA). The LNA in this antenna will boost the GPS satellite signal, allowing the antenna to be connected with long sections of coax cable. When used with the M7 transponder in a AVL tracking system, GPS reception is improved in dense areas, even in urban canyons and sometimes indoors.
The M7 GPS transponder powers the RT-AN-GP1 through the coax cable. The center conductor of the coax cable passes power from the M7 to the GPS antenna, as well as passing GPS satellite signals from the antenna to the M7.
Antenna RT-AN-GP2
28dB(5V) Active GPS Black Through-hole MountAnt w/17' RG174 and SMA Male
Connector Type: SMA Male
Color: Black
FrequencyRange: 1575.4 MHz
Gain: 28 dB ±2 dB
Polarization: Right Hand Circular
Noise Figure: 2.0 dB Max
Voltage: 3 Vdc
Current: 20 mA Max
Housing: Resin Polymer Plastic
Dimensions: 2.5"(Dia) x .7"(H)
Cable Type: 6' RG174
Mounting: Bolt with 3/4" Hole & Double Sided Tape
Th RT-AN-GP2 antenna can be used with the M7-GX GPS series transponders. It is a "thru hole" vehicle mount antenna.
The RT-AN-GP2 GPS antenna has a built in 3V low-noise amplifier (LNA). The LNA in this antenna will boost the GPS satellite signal, allowing the antenna to be connected with long sections of coax cable. When used with the M7 transponder in a AVL tracking system, GPS reception is improved in dense areas, even in urban canyons and sometimes indoors.
The M7 GPS transponder powers the RT-AN-GP2 through the coax cable. The center conductor of the coax cable passes power from the M7 to the GPS antenna, as well as passing GPS satellite signals from the antenna to the M7.