Telemetry & SCADA


Supervisory Control and Data Acquisition (SCADA) Solutions

Raveon's data radio products are well-suited for wireless telemetry, wireless SCADA, remote control and power grid management. VHF and UHF radio frequencies offer very long range communication ability, and with the fastest transmit / receive turn around time in its class, hundreds of thousands of meters may be polled or report-in every day on a single radio channel.


Features such as store-and-forward repeating and MIMIC mode make the M7 data radio modem the right choice for your wireless telemetry system.




  • High-speed over the air data rates. 19200bps in 25kHz channel, 9600bps in 12.5kHz.


  • Remote status monitoring including DC voltage, packet error statistics, modem “up time”, and receiver signal strength.


  • RS-232, RS422, RS485 on all M7 radios. RS232 is standard, and RS422 and 485 options are available.


  • Very fast Transmit-to-Receive turn around.  3mS attack time enables very fast polling in your wireless telemetry system.


  • Easy to use. Plug-in, Turn-on, and GO.  Transmit data in = Receive data out.


  • Low Cost. Raveon's M7 series of wireless data modems are the most economical data radio modems on the market.


  • Remote "PING"   From any modem, a user may send a "PING" to any other radio modem to find out the link signal strength.  This allows quick diagnostics, easy antenna alignment, and reduced site visits.


  • Lowest current draw in industry.  Most Raveon wireless modems draw less than 90mA when fully operational, and some are less than 80mA.


  • Wide input voltage with high-efficiency switching voltage regulator.


  • Packetized AND Streaming Data.  Integrated Packetized data protocol with error correction and built-in Streaming Real-Time operation. User selectable.


  • ARQ error correction and retransmission capability.  Totally transparent to the application.


  • Capable of store-and-forward repeating operation.


  • Small size.   Extruded aluminum enclosure is small, and very rugged.


  • 16 bit addressing for up to 65,525 different unique device addresses per channel.  Radio channels may be shared with no interference between users.


  • Supports group and broadcast transmissions.  Network mask allows groups of any size.


  • Easily to configure.  FireLine modems are configured using “AT” commands through the modem’s serial port or by using Raveon's Windows-based Radio Manager configuration program.  There is no need for a separate serial link to the modem to configure or manage it.


  • RS-232 serial input and output.  Programmable serial baud rates up to 115400 make the FireLine compatible with most every PLC, PC, and HMI device made.


  • Programmable over-the-air data rates.   With the FireLine, YOU can choose how your system will work.  Set the OTA data slower for extended communication range, or set it fast for lowest latency.  Your choice.


  • SkyLine compatibility mode for use in older Sonik radio systems.